Status Help

The Status page displays the Router's current status and configuration. All information is read-only.

LAN - The following parameters apply to the LAN port of the Router. You can configure them on the Network -> LAN page.

• MAC Address - The physical address of the Router, as seen from the LAN.
• IP Address - The LAN IP address of the Router.
• Subnet Mask - The subnet mask associated with LAN IP address.

Wireless - These are the current settings or information for Wireless.You can configure them in the Wireless -> Basic Settings page.

• Operation Mode - Indicates the mode which the device is working on.
• Wireless Radio - Indicates whether the wireless radio feature of the Router is enabled or disabled.
• Name(SSID) - The SSID of the Router.
• Mode - The current wireless mode which the Router works on.
• Channel - The current wireless channel in use.
• Channel Width - The bandwidth of the wireless channel.
• MAC Address - The physical address of the Router, as seen from the WLAN.
WDS Status - The status of the WDS connection is displayed.

WAN - The following parameters apply to the WAN ports of the Router. You can configure them in the Network -> WAN page.

• MAC Address - The physical address of the WAN port, as seen from the Internet.
• IP Address - The current WAN (Internet) IP Address. This field will be blank or 0.0.0.0 if the IP Address is assigned dynamically and there is no connection to Internet.
• Subnet Mask - The subnet mask associated with the WAN IP Address.
• Default Gateway - The Gateway currently used by the Router is shown here.
• DNS Server - The DNS (Domain Name System) Server IP addresses currently used by the Router. Multiple DNS IP settings are common. Usually, the first available DNS Server is used.
• Online Time - The time that you are online. When you use PPPoE as WAN connection type, the online time is displayed here.

Secondary Connection - The Secondary Connection will be shown in this area.

System Up Time - The length of time since the Router was last powered on or reset.

Click the Refresh button to get the latest status and settings of the Router.