Click to skip the navigation bar

MS110CP [V1] | 8-Port 10/100 Mbps + 2-Port Gigabit Desktop Switch with 8-Port PoE+

MS110CP

New Comers

8-Port 10/100 Mbps + 2-Port Gigabit Desktop Switch with 8-Port PoE+

  • 10 Ports: 8× 10/100 Mbps PoE+ Ports + 2× Gigabit non-PoE Ports
  • Two Cables in One: With 8 PoE+ ports, transfers data and power on one single cable
  • High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports*
  • 2× Uplink Ports: MS110CP provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR.
  • Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode**
  • Isolation Mode: One click to divide traffic for specific ports for stability and security
  • Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs
  • Plug and Play: Simple to use and saves time and effort
  • PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
  • Durable Metal Casing: Allows for efficient heat dissipation and long network life

Overview

8-Port 10/100Mbps +
2-Port Gigabit Desktop
Switch with 8-Port PoE+

MS110CP
65W
PoE Budget
8×
PoE+
Ports
2×
Gigabit
Ports
Plug and Play
Long-Range
up to 250 m
Isolation
Mode
PoE Auto
Recovery
Silent
Operation
Durable Metal
Casing

8 PoE+ Ports and 2 Gigabit Ports for Network Deployment

Compliant with the 802.3af/at Powered Devices, each of the 8 PoE+ ports supports a maximum power supply of 30 W. 2 Gigabit non-PoE ports are for uplink devices, one of which is used to connect to the internet and the other to the NVR. The total 65 W PoE power budget* can be applied in various scenarios, including surveillance, offices, dormitories, and small businesses, since MS110CP is compatible with devices such as IP cameras, access points, IP phones, PCs, video recorders, and etc.

30W
Max on
Each Port
65W
Total Power
Budget
IP Camera
IP Phone
Access Point
Data and Power
Data Only

8 PoE+ Ports and 2 Gigabit Ports for Network Deployment

Compliant with the 802.3af/at Powered Devices, each of the 8 PoE+ ports supports a maximum power supply of 30 W. 2 Gigabit non-PoE ports are for uplink devices, one of which is used to connect to the internet and the other to the NVR. The total 65 W PoE power budget* can be applied in various scenarios, including surveillance, offices, dormitories, and small businesses, since MS110CP is compatible with devices such as IP cameras, access points, IP phones, PCs, video recorders, and etc.

Gigabit ×2
INTERNET
Router
Network Video Recorder
Data and Power
Data Only
 

Power over Ethernet: Two Cables in One

Traditional Switches

Power

Data

MS110CP

Power + Data

No Fuss

No need for electricians; simplify installation and deployment.

Cost-Efficiency

Getting rid of extra cables and power adapters will save money on infrastructure.

Flexibility

Deployment in complex situations is made possible by more placement possibilities.

Power Management

Improves power usage while intelligently protecting your gadgets from power surges.

IEEE 802.3af/at

PoE ports compliant with the 802.3af/at Powered Devices.

Long-Range up to 250 m with Extend Mode**

Extend Mode** increases PoE transmission distance to 250 m. MS110CP has eight long-range ports with PoE+. Turn on the Extend Mode and make it ideal for installing surveillance cameras over wide areas.

250m

Traffic Separation

With only one click, isolation mode divides traffic for ports 1-8 to prevent snooping/tampering and isolate broadcast storms for greater protection. MS110CP provides 2× uplink ports when turning on the isolation mode.

PoE Auto Recovery
IP Camera

PoE Auto Recovery

The switch continuously detects data transmission with PoE-powered devices (PD). When a PD stops sending data packets to the switch for an extended length of time, the switch will reboot it automatically.

MDI
auto
MDIX

Plug and Play

MS110CP offers auto-negotiation(10/100M) and automated MDl/MDIX. There is no additional configuration needed. lt is simple to use, saving time and effort.

Durable and Silent

MS110CP's durable metal case allows for efficient heat dissipation, excellent signal interference prevention, reliable equipment stability, and a long network life.

Durable Metal Casing
Silent Operation
Wall
Mount

*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10 Mbps. Actual transmission distance may vary from the quality of the cables.

Specifications

Hardware
Dimensions

6.7 × 3.9 × 1.1 in (171 × 98 × 27 mm)

PoE Ports

RJ45

Standard: Compliant with 802.3 af/at Powered Devices
PoE Ports: Port 1- Port 8
PoE Power Budget: 65 W

Interfaces

8× 10/100 Mbps Ports, 2× Gigabit Ports

External Power Supply

External Power Adapter (Output: 53.5V/1.31A)

Installation

Desktop / Wall Mount

Standards and Protocols

 

IEEE 802.3x Flow Control

Data Rates

10/100 Mbps at Half Duplex
20/200 Mbps at Full Duplex

Jumbo Frame

2 KB

Switching Capacity

5.6 Gbps

Mac Address Table

2K

Max Power Consumption

3.5W（220 V / 50 Hz, no PD connected）

74.93W（220 V / 50 Hz, with 65W PD connected

Max Heat Dissipation

11.935 BTH/h （no PD connected)

255.51 BTH/h（with 115W PD connected）

Others
Package Contents

• 10-Port 10/100Mbps Desktop Switch with 8-Port PoE+ (MS110CP)
• Power Adapter
• Quick Installation Guide

Environment

Operating Temperature: -10℃~40℃ (14℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% RH non-condensing
Storage Humidity: 5%~95% RH non-condensing